NodeMcu Lua WIFI Internet of Things development board ESP8266-12E
£7.29
Description
This is the New ESP8266 Module with the built in CP2101 USB To Serial interface.
The development module incorporates the ESP8266-12E Wifi module, the pins brought out to a breadboard friendly header pins.
This module will come with the firmware preloaded from your selection
AT Firmware Selection - The module will be flashed with the AI Thinker AT Firmware. This will allow you to send AT commands to the module. Baud Rate is 115200 with New line and Carriage Return.
Arduino Firmware Selection - The module will be flashed with the Arduino Blink Sketch, this will blink the on-board GPIO16 Led. You will be able to upload your own Arduino Sketch.
You will need to do the following:
1) Install the lastest version of Arduino from Arduino website.
2) Launch the Arduino application.
3) Open Preferences window from the file tab. In the Additional Board Manager URLs field, enter http://arduino.esp8266.com/stable/package_esp8266com_index.json
4) Open Sketch > Include Library > Manage Library and install esp8266 platform.
5) From Tools > Board menu Select your ESP8266 Board - NodeMCE
6) Baud Rate 115200
NodeMCU Firmware Selection - The module will be flashed with the NodeMCU Firmware flashed for you. So you can start writing your Lua code and upload this via a suitable Lua Uploader. Baud Rate 9600
So simply choose the firmware that you are comfortable with !!
The CP2101 USB driver can be downloaded from here CLICK.
The development module incorporates the ESP8266-12E Wifi module, the pins brought out to a breadboard friendly header pins.
This module will come with the firmware preloaded from your selection
AT Firmware Selection - The module will be flashed with the AI Thinker AT Firmware. This will allow you to send AT commands to the module. Baud Rate is 115200 with New line and Carriage Return.
Arduino Firmware Selection - The module will be flashed with the Arduino Blink Sketch, this will blink the on-board GPIO16 Led. You will be able to upload your own Arduino Sketch.
You will need to do the following:
1) Install the lastest version of Arduino from Arduino website.
2) Launch the Arduino application.
3) Open Preferences window from the file tab. In the Additional Board Manager URLs field, enter http://arduino.esp8266.com/stable/package_esp8266com_index.json
4) Open Sketch > Include Library > Manage Library and install esp8266 platform.
5) From Tools > Board menu Select your ESP8266 Board - NodeMCE
6) Baud Rate 115200
NodeMCU Firmware Selection - The module will be flashed with the NodeMCU Firmware flashed for you. So you can start writing your Lua code and upload this via a suitable Lua Uploader. Baud Rate 9600
So simply choose the firmware that you are comfortable with !!
The CP2101 USB driver can be downloaded from here CLICK.

Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and test each module, we are therefore unable to accept any returns based on a faulty module.
This item will be fully tested prior to despatch. Buy with confidence.