Generic
Light Dependent Resistors
These high quality and compact light dependent resistors are ideal for any situation where you need your project to act differently depending on the level of light.
These LDRs decrease in resistanc…
SKU: 236248
Product Code: LDR
£0.50
1N4148 Silicon Switching Diode - Pack Size 5, 10, 25, 50 and 100
The 1N4148 Silicon switching diode is a widely used diode that can be used in switching applications of up to approximately 100MHz, and has a recovery time of no more than 4ns.
Absolute Maximum Ra…
SKU: 232977
Product Code: 1N4148
£0.99
Surface Mount 0805 Series Resistors
The 0805 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors ca…
SKU: 233942
Product Code: RESISTOR/SMD/0805
From:
£0.99
1N4007 General Purpose Diode - Pack Size 5, 10, 25, 50 and 100
This item is the 1N4007 General Purpose Diode/Rectifier. It features a low forward voltage drop (only 1.1V) and a high surge current capability (spikes up to 30A).
Absolute Maximum Ratings
These…
SKU: 232976
Product Code: 1N4007
From:
£0.99
Surface Mount 1206 Series Resistors
The 1206 series of surface mount resistors is a popular range ideal for use for both the professional and the hobbyist.
Surface mount resistors are designed for use on PCBs - these resistors can be…
SKU: 237975
Product Code: RESISTOR/SMD/1206
From:
£1.29
SW520D Ball Angle Tilt Vibration Shaking Switch Sensor
Tilt Switch with internal ball that will switch to ON state of approx. 15 degrees tilt. Also great for sensing excessive vibration
Material: Housing and cover: PE heat shrinkable tubing/ Ball: S…
SKU: 238432
Product Code: SW520D
From:
£1.49
Toroid Core Inductors Wire Wind Wound for DIY mah--100uH 6A Coil
Description
Toroid Core Inductors Wire Wind Wound for DIY mah--100uH 6A Coil
UK STOCK, UK SELLER
Specification
Inductance: 100uH
Wire Diameter: 0.55mm
Inner Diameter: 6mm
Ou…
SKU: 238500
Product Code: Toroid/100uh
£1.79
Resistors for use with LEDs - 3.3V, 5V, 6V, 9V, 12V - 100 pack
These high quality resistors are suitable for use with LEDs - simply choose the voltage you want to power your LED from and the correct resistors will be supplied.
The resistors supplied are based …
SKU: 238041
Product Code: LED Resistors
£2.50
Focusable 5mW 650nm Red Cross Line Laser Module Focus Adjustable laser Head
100% Brand new and high quality
Output Power: 5mW
Wavelength: 650nm
Working Voltage max: 5V (Do Not Exceed)
Laser Shape: Cross Line
Working temperature: -10 ℃~+40 ℃
Housing material: Coppe…
SKU: 238409
Product Code: 5mW-Focus
£3.33
DS3231 AT24C32 IIC precision Real time clock module memory module M61
Low-cost, extremely accurate I2C real-time clock (RTC), with an integrated temperature-compensated crystal oscillator (TCXO) and crystal.
The device incorporates a battery input,&nbs…
SKU: 238367
Product Code: DS3231-RTC
£3.99
DS1307 Tiny RTC - Real time clock breakout board
Description
The Tiny RTC real time clock breakout board provides a Maxim DS1307 Real Time Clock - including a battery holder and a battery - and an Atmel 24C32 EEPROM.
It can optionally also hav…
SKU: 238477
Product Code: TINY-RTC
£4.99
600 piece Resistor Pack - 30 different values - 20x of each value
These resistors come in strips of 20 for each resistor value so you can easily separate them - they are not in one mixed bag.
This is a pack of 600 high quality metal-film resistors rated at 0.25W co…
SKU: 236243
Product Code: Resistor Pack
£4.99
5V Red Laser Diode
Output Power: 5mW
Wavelength: 650nm
Working Voltage: 5V
Laser Shape: Dot
Working temperature: -10 ℃~+40 ℃
Housing material: Copper
Dimensions: 6 * 18 mm(diameter*length)
Outer diameter: 6mm
SKU: 238488
Product Code: Laser-5V-5MW
£4.99
Tiny RTC - Real time clock breakout board
The Tiny RTC real time clock breakout board provides a Maxim DS1307 Real Time Clock - including a battery holder and a battery - and an Atmel 24C32 EEPROM.
It can optionally also have a Maxim DS18B20…
SKU: 230592
Product Code: TINY-RTC
£4.99
ENC28J60 Ethernet Shield For Arduino Nano V3.0 RJ45 Webserver Module
Description
ENC28J60 Ethernet Shield For Arduino Nano V3.0 RJ45 Webserver Module
UK STOCK, UK SELLER
Specification
This Ethernet Shield, will allow your Arduino Nano board to connect t…
SKU: 238537
Product Code: ENC28J60/nano
£6.99