Show All /
1 Channel Infrared Switch Relay Driving Module Board 5V Active Remote Controller
£4.99
Description
1 Channel Infra-red Switch Relay Driving Module Board 5V Active Remote Controller
UK STOCK, UK SELLER
Specification:
Working voltage: 5V
Control distance: 8m
The Relay Board has the 3mm screw holes for easy installation.
Relay Module interfaces: VIN + Positive 5V and GND Ground
3 Way Terminal Block; The middle port of the three terminal block is Commom contact, the other two terminals are normally open and normal close contacts.
3 Way Terminal Block; The middle port of the three terminal block is Commom contact, the other two terminals are normally open and normal close contacts.
Main Board size: 5.0 * 2.0 * 1.8cm / 1.97 * 0.79 / 0.28in
Remote Controller Size: 8.5 * 4.0 * 0.7cm / 3.35 * 1.57 * 0.28in
Main Board weight: 15g / 0.53oz
Remote Controller: 14g / 0.5oz
Remote Controller: 14g / 0.5oz
Package size: 11.5 * 7.5 * 3.0cm / 4.53 * 2.95 * 1.18in
Package weight: 33g / 1.17oz
Battery included with Remote Control
Important Note Before you decide to Buy: This item is provided with NO instructions or data sheets. We are unable to provide any technical support, it is therefore essential that you have the resources available to make use of this item and how it operates within the electrical specifications. We check and test each module, we are therefore unable to accept any returns based on a faulty module.
This item will be fully tested prior to dispatch. Buy with confidence.
